CCNA: IPv6

less than 1 minute read

Description:

Ipv6 commands for Cisco Routers

Global IPv6 commands:

R1(config)#ipv6 unicast-routing

Interface IPv6 commands:

R1(config)#ipv6 unicast-routing

R1(config)#interface FastEthernet0/0

R1(config-if)# ipv6 address 2001:DB8:0:1::/64 eui-64 

# Configures a link-local address on the interface that is used instead of the ...
# link-local address that is automatically configured when IPv6 is enabled on the interface. 
# Just remember it needs to be in the FE80::/10 range.
R1(config-if)# ipv6 address fe80:1234:abcd:1::3 link-local 

# Adds an IPv6 anycast address.
R1(config-if)# ipv6 address 2001:DB8:0:1::/64 anycast 

# Enables automatic configuration of IPv6 addresses using stateless 
# autoconfiguration on an interface and enables IPv6 processing on the interface.
R1(config-if)# ipv6 address autoconfig

Show Commands:

show ipv6 interface brief
show ipv6 route

 

Tags:

Categories:

Updated: